To vectorize a pattern in Illustrator, place one clean tile of the pattern, open Window, Image Trace, start from a limited-color preset, set the color count to the number of inks you will print, then Expand the result, clean the paths and rebuild the repeat with Object, Pattern, Make. It works best on flat-color prints with a handful of colors. Painterly, photographic and gradient-heavy patterns usually print better left as high-resolution raster files.
Before you trace: prepare one perfect tile
Image Trace is only as good as the pixels you give it, and most bad traces start with a bad source. Ten minutes of preparation saves an hour of path editing.
- Trace one tile, not a swatch. Crop exactly one repeat unit. If you trace a photo of several repeats, you will get several slightly different copies of every motif.
- Give it enough pixels. A motif that is 40 pixels across has nothing for the tracer to follow. Aim for the main motifs to be a few hundred pixels wide; upscale small sources first.
- Flatten colors. Remove scanner dust, paper texture and JPEG noise, and if you can, reduce the image to its real ink colors in a raster editor first. Every stray shade becomes a stray shape.
- Straighten it. A scan that is 1° off turns straight stripes into stepped edges.
Step 1: place the image and open Image Trace
Choose File, Place to bring the tile onto the artboard, select it, and open Window, Image Trace. In the Preset menu you can switch between Enhanced and Legacy presets. Adobe's documentation says enhanced presets build in support for gradients, shapes, transparency and auto grouping depending on the preset, while with legacy presets you set those options yourself.
The enhanced icons at the top of the panel are Auto-Color, High Color, Low Color, Grayscale, Black and White and Outline. For textile prints, Low Color (a limited number of colors) or a fixed-count preset such as 6 Colors is a better starting point than High Color, which aims for photorealism and produces thousands of shapes. Open the Advanced section with the small arrow so you can see every control.
Step 2: settings for flat textile prints
These starting points assume a clean source tile. Adjust one slider at a time and use the Info area, which shows the number of paths, anchors and colors, to see what each change costs.
| Setting | Flat multicolor print | Black line art | Line drawing to strokes |
|---|---|---|---|
| Preset | Low Color or 6 Colors | Black and White | Outline |
| Mode / Palette | Color, Limited | Black and White, set Threshold | Black and White |
| Colors | Your ink or screen count | n/a | n/a |
| Paths | Middle, raise for detail | Middle to high | Middle |
| Corners | Lower for florals, higher for geometrics | Middle | Higher |
| Noise | 20 to 50 on high-res sources | Raise to drop specks | Raise to drop specks |
| Method | Abutting or Overlapping (ask your printer) | Abutting | n/a |
| Options | Snap Curves To Lines for geometrics; Ignore Color for the ground | Ignore Color on white | Snap Curves To Lines |
A few of these deserve explanation:
- Palette: Limited keeps the trace to a small set of colors, and the Colors slider sets how many. Document Library instead uses a color group from your Swatches panel, which is useful when the print must use an approved palette.
- Paths controls how tightly paths follow the pixels. Higher is more faithful but bumpier; lower is smoother but can round off points of leaves and petals.
- Noise is the area in pixels ignored while tracing. Adobe suggests 20 to 50 for high-resolution images and 1 to 10 for low-resolution ones.
- Method: Abutting creates cutout shapes whose edges meet exactly; Overlapping stacks shapes so each slightly overlaps the next. Some screen printers prefer the overlap as built-in trap, others want abutting shapes and add trap themselves.
- Ignore Color skips a chosen color, typically the white or background ground, so you do not print a white screen you never wanted.
Step 3: expand and clean the paths
When the preview looks right, click Expand. This converts the trace into grouped, editable paths, and from that point the tracing options can no longer be adjusted, so save a copy of the unexpanded trace first. Then:
- Double-click the group to edit in isolation mode, or ungroup it to work on paths one by one.
- Use Object, Path, Simplify to remove excess anchor points from organic shapes.
- Delete leftover specks with Select, Same, Fill Color, then remove the tiny ones by eye.
- To reassign colors to your exact palette, use Recolor Artwork, or convert the paths to a Live Paint group with Object, Live Paint, Make to refill regions quickly.
Adobe's own advice is that it is always better to optimize the trace settings than to fix paths afterwards, because editing a complex multicolor trace by hand is slow. If you find yourself redrawing half the motifs, go back and re-trace with different settings.
Step 4: keep the repeat intact
This is where most traced patterns fail. A tracer treats the tile edges as the edge of a picture, not as a seam, so a motif that crosses the boundary gets two separately traced halves that no longer meet perfectly. Adobe also notes that a trace result always sits slightly down and to the right of the source.
- Re-align first. Draw a rectangle exactly the size of the original tile and align the expanded artwork to it.
- Fix the seams. For each motif that crosses an edge, copy the cleaner half, move it by exactly one tile width or height, and replace the other half so both sides are identical.
- Rebuild the pattern. Select the artwork and choose Object, Pattern, Make. In Pattern Options, set the Tile Type (Grid, Brick by Row or Brick by Column for half-drop style layouts), and type the tile Width and Height to match your original repeat exactly rather than relying on Size Tile to Art.
- Check it. Raise Copies and turn on Show Tile Edge to see the surrounding repeats. Any gap or doubled sliver at the seam will show up immediately.
For a deeper production checklist covering separations, stroke weights and file hand-off, see our tutorial on vectorizing patterns for production.
When not to vectorize a pattern
Vectorizing is a means, not a goal. It pays off when the print process needs clean, scalable shapes: screen printing with a fixed number of screens, vinyl or cut work, embroidery digitizing, and very large formats. It is often the wrong choice when:
- The pattern is painterly or photographic. Watercolor blooms, brush texture and soft gradients turn into thousands of flat shapes. Adobe's own presets guide points out that a small photo does not become infinitely scalable by tracing it.
- The job is digital printing. Digital textile printers print raster files. A well-prepared PNG or TIFF at the right size and DPI is the native format, and tracing only risks losing detail.
- The source is tiny or blurred. Low-resolution sources usually need heavy manual correction after tracing. Redrawing the key motifs by hand is often faster and cleaner.
If you are unsure which format a printer needs, our guide to converting PNG to SVG for textile printing covers when SVG helps and when PNG or TIFF is the better file.
A faster option for simple motifs
For a logo, a one-color motif or a quick test before a full Illustrator session, Texloom's free Vectorize Studio traces a JPG, PNG or WEBP into an SVG you can open straight in Illustrator. It has a color detail slider from black-and-white to full color, line detail and simplify controls (simplify drops tiny paths), a smooth curves switch and an Ignore White option, and it shows the path count and file size before you download. In the studio, Vectorize Studio adds a Pro mode on paid plans for cleaner paths on complex artwork; see pricing.
Final checks before you send the file
- The number of fill colors matches the number of screens or inks.
- No white or background shapes remain unless the white is printed.
- No specks smaller than your printer's minimum line or dot.
- The pattern swatch repeats without gaps at 3×3, at 100% zoom.
- The file is saved in the format your printer asked for, with a flattened PNG preview alongside it.
Take one flat-color tile you already have, trace it with the Low Color preset and your real ink count, and rebuild the repeat. Doing it once end to end will show you exactly where your own artwork needs cleanup.


