Skip to content
Docs/Utilities/Bleed & Safe Zone

How to use Bleed & Safe Zone

Lay your artwork on a hang tag, card or paper size and see the bleed past the cut, the trim line and the safe line, as a proof PNG at print DPI.

Credit Usage

Options & Settings

SettingTypeDescription
SheetButtonsThe finished (trim) size: hang tag, business cards, postcards, A5 to A3, US Letter and Tabloid.
BleedButtonsHow far the artwork must run past the cut so no white edge shows.
0 mm1.5 mm3 mm5 mm
Safe zoneButtonsHow far inside the cut to keep text and logos.
3 mm5 mm8 mm10 mm

When to Use

  • Checking a hang tag or label before sending it to print
  • Showing a client where the cut will fall
  • Making sure text sits clear of the trim

Pro Tips

💡

The proof is the full document: trim plus bleed on every side

💡

Red is the trim line, green is the safe line

💡

Artwork that does not match the sheet's shape is fitted inside it, so check the edges

How do I…

How do I check bleed and safe zone before printing?

Load the artwork, pick the sheet size, the bleed and the safe zone, and press Make proof. Red marks the trim, green the safe line.

What is the difference between bleed and safe zone?

Bleed is the extra artwork past the cut, so no white edge shows. The safe zone is the margin inside the cut where text and logos stay clear of the blade.

What size is the proof?

The full document: the trim size plus the bleed on every side, tagged with the DPI that prints it at that size.

What to Expect

✅

Best Results

  • Tags, labels, cards and flyers
  • Artwork already sized for the sheet
⚠️

Limited Results

  • Artwork far from the sheet's shape
  • Very low-resolution artwork at large sizes

Ready to try Bleed & Safe Zone?

Open in Studio →