Skip to content
Docs/Utilities/Halftone Generator

How to use Halftone Generator

Turn a design into halftone dots for screen printing: circle, square or line dots at your lines per inch and angle, as a film-ready PNG.

Credit Usage

Options & Settings

SettingTypeDescription
Dot shapeButtonsCircle dots for most work, square dots for a harder graphic look, lines for an engraved effect.
CircleSquareLine
Density (lines per inch)SliderHow many rows of dots per inch. Lower is coarser and easier to burn and print; higher holds more detail.
10 to 120
Screen angleSliderThe angle of the dot grid. 45° is the usual single-colour angle; change it per colour to avoid moiré.
0° to 90°
InvertToggleWhite dots on black instead of black dots on white.

When to Use

  • Preparing a photo or gradient for one-colour screen printing
  • Making a film positive with a controlled dot size
  • Giving a design a vintage halftone look

Pro Tips

💡

Change a setting after the first result and it redraws on its own

💡

The file is tagged with the DPI that keeps the dots at your lines per inch

💡

For several colours, run each separated plate through with its own screen angle

How do I…

How do I make a halftone for screen printing?

Load your design, pick a dot shape, set the lines per inch and the screen angle, and press Make halftone. The result is a black-and-white PNG for film.

What lines per inch should I use?

Coarser screens (around 35 to 55) are easier to burn and print on fabric; finer screens hold more detail but need a finer mesh. 55 is the default.

Does the file print at the right dot size?

Yes. The PNG is tagged with the DPI that keeps the dots at the lines per inch you chose.

What to Expect

✅

Best Results

  • Photos and soft gradients
  • One-colour prints
  • Film positives
⚠️

Limited Results

  • Tiny text (dots break up fine strokes)
  • Very low-resolution sources

Ready to try Halftone Generator?

Open in Studio →